METAL TIP PRO TOOLS

On this page:
Superfine Pro Metal Tip Tools
Fine Pro Metal Tip Tools
Micro Pro Metal Tip Tools
Deluxe Metal Tip Pro Set

SUPERFINE PRO METAL TIP TOOLS

Superfine Pro, our smallest tips, have spatula widths of (approximately) less than 1 mm. These stainless steel tips are for the very finest detailing on figures of 4" or less. They are excellent for achieving minute detail on 28mm to 50mm wargame figures.

To get a clear idea of the size of the tools, we recommend that you hold an inch-scale ruler up to the one pictured.


Click on the illustration to see an enlarged view of the tips.



From top to bottom:
SFP-1J Knife $25.00
SFP-2J Chisel $25.00
SFP-3J Curved Chisel $25.00
SFP-4J Straight Spatula $25.00
SFP-5J Curved Spatula $25.00
SFP-6J Angled Spatula $25.00
SFP-7J Club Spatula $25.00
SFP-8J Angled Chisel $25.00
SFP-9J Scimitar Knife $25.00
SFP-10J Dagger $25.00
SFP-11J Superfine Pro Set (all 10 tools) $225.00

FINE PRO METAL TIP TOOLS

Fine Pro Tips have spatula widths of approximately 1mm. They are about 30% larger than Superfines but about 30% smaller than Micros. Use these tips for details on figures under 4" and/or for extremely fine detailing on all scales.

To get a clear idea of the size of the tools, we recommend that you hold an inch-scale ruler up to the one pictured.

Click on the illustration to see an enlarged view of the tips.

From top to bottom:
FP-1J Knife $25.00
FP-2J Chisel $25.00
FP-3J Curved Chisel $25.00
FP-4J Straight Spatula $25.00
FP-5J Curved Spatula $25.00
FP-6J Angled Spatula $25.00
FP-7J Club Spatula $25.00
FP-8J Angled Chisel $25.00
FP-9J Scimitar Knife $25.00
FP-10J Arched Spatula $25.00
FP-11J Fine Pro Set (all 10 tools) $225.00

MICRO PRO METAL TIP TOOLS

Micro Pro Tips are useful for detailing on figures from 5" to 18" in height. They are also useful for modeling and smoothing on figures under 4" and wargame figures. The new "Curl" tips (MP-9J Left Curl and MP-10J Right Curl) are used to model a contoured surface, such as the lips or the edge of clothing. The opposite "curls" allow you to work close to either end of the contoured surface.

To get a clear idea of the size of the tools, we recommend that you hold an inch-scale ruler up to the one pictured.

RETURN TO TOP OF PAGE

HOME